Self Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing which can be caused, for example, by shaft deflection.
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
- Toyana 1209 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 15 mm x 26 mm x 12 mm ISB GE 15 BBL self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 240 mm x 320 mm x 60 mm SKF 13948 self aligning ball bearings
- Normal Duty
- Eccentric Collar Ball Bearing
- 30 mm x 70 mm x 30 mm NMB PBR30FN self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- Toyana 11204 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 95,000 mm x 170,000 mm x 32,000 mm SNR 1219 self aligning ball bearings
- Normal Duty
- Eccentric Collar Ball Bearing
- Toyana 2302-2RS self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 30 mm x 62 mm x 20 mm NKE 2206-2RS self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 80 mm x 170 mm x 58 mm NTN 2316SK self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 55 mm x 100 mm x 25 mm NKE 2211-2RS self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 35 mm x 80 mm x 31 mm ISB 2307 KTN9 self aligning ball bearings
- Intermediate Duty
- Eccentric Collar Ball Bearing
- 69,85 mm x 133,35 mm x 23,8125 mm RHP NLJ2.3/4 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing